High-pressure TEM sample holder and gas mixing system

Section I: Contracting authority

I.1) Name and addresses

Danmarks Tekniske Universitet — DTU
30060946
Anker Engelunds Vej 1
Kgs. Lyngby
2800
Denmark
Contact person: Rikke Kjeldsmark Nielsen
Telephone: +45 93511686
E-mail: rikkn@adm.dtu.dk
NUTS code: DK

Internet address(es):

Main address: www.dtu.dk

Address of the buyer profile: https://eu.eu-supply.com/ctm/Company/CompanyInformation/Index/165863

I.2) Joint procurement

I.4) Type of the contracting authority

Body governed by public law

I.5) Main activity

Education

Section II: Object

II.1) Scope of the procurement

II.1.1) Title:

High-pressure TEM sample holder and gas mixing system.

Reference number: 16/07088

II.1.2) Main CPV code

38430000

II.1.3) Type of contract

Supplies

II.1.4) Short description:

This contract describes the requirements of a high-pressure TEM sample holder and gas mixing system, which will be purchased by DTU Cen. The specified TEM holder should in general allow characterization of nano-materials in a transmission electron microscope in a continuous gas flow at ambient pressure (and above) and elevated temperatures. The TEM holder should be compatible with a FEI Titan (Super twin) transmission electron microscope without any modifications to the microscope. The allowance of the high pressure in situ characterization should not compromise the microscope performance or safety. A gas mixing system allowing control of gas pressure and composition should be part of the package, integrating the gas flow control and the heating of the specimen in the holder.

II.1.6) Information about lots

This contract is divided into lots: no

II.2) Description

II.2.1) Title:

II.2.2) Additional CPV code(s)

38430000

II.2.3) Place of performance

NUTS code: DK

II.2.4) Description of the procurement:

This contract describes the requirements of a high-pressure TEM sample holder and gas mixing system, which will be purchased by DTU Cen. The specified TEM holder should in general allow characterization of nano-materials in a transmission electron microscope in a continuous gas flow at ambient pressure (and above) and elevated temperatures. The TEM holder should be compatible with a FEI Titan (Super twin) transmission electron microscope without any modifications to the microscope. The allowance of the high pressure in situ characterization should not compromise the microscope performance or safety. A gas mixing system allowing control of gas pressure and composition should be part of the package, integrating the gas flow control and the heating of the specimen in the holder.

II.2.5) Award criteria

Quality criterion - Name: Quality / Weighting: 65

Quality criterion - Name: Service / Weighting: 5

Price - Weighting: 30

II.2.11) Information about options

Options: yes

Description of options:

The description of the options can be found in the specifications and price list.

II.2.13) Information about European Union funds

The procurement is related to a project and/or programme financed by European Union funds: no

II.2.14) Additional information

Section IV: Procedure

IV.1) Description

IV.1.1) Type of procedure

Open procedure

IV.1.3) Information about a framework agreement or a dynamic purchasing system

IV.1.6) Information about electronic auction

IV.1.8) Information about the Government Procurement Agreement (GPA)

The procurement is covered by the Government Procurement Agreement: yes

IV.2) Administrative information

IV.2.1) Previous publication concerning this procedure

Notice number in the OJ S: 2016/S 120-212962

IV.2.8) Information about termination of dynamic purchasing system

IV.2.9) Information about termination of call for competition in the form of a prior information notice

Section V: Award of contract

Contract No: 1

Lot No: 1

Title:

High-pressure TEM sample holder and gas mixing system

A contract/lot is awarded: no

V.1) Information on non-award

The contract/lot is not awarded

Other reasons (discontinuation of procedure)

Section VI: Complementary information

VI.3) Additional information:

The tender is cancelled because the offered price exceeds the DTU budget.

VI.4) Procedures for review

VI.4.1) Review body

Danish Complaints Board
Dahlerups Pakhus, Langelinie Allé 17
København Ø
2100
Denmark
Telephone: +45 35291095
E-mail: klfu@erst.dk

Internet address:https://erhvervsstyrelsen.dk/klagenaevnet-for-udbud

VI.4.2) Body responsible for mediation procedures

VI.4.3) Review procedure

VI.4.4) Service from which information about the review procedure may be obtained

Konkurrence- og Forbrugerstyrelsen / Danish Competition and Consumer Authority
Carl Jacobsens Vej 35
Valby
2500
Denmark
Telephone: +45 41715000
E-mail: kfst@kfst.dk
Fax: +45 41715100

Internet address:http://www.kfst.dk/

VI.5) Date of dispatch of this notice:

18/08/2016

{{ visitor.user.name }}

Fakta om udbudet

High-pressure TEM sample holder and gas mixing system

Danmarks Tekniske Universitet — DTU

Send til en kollega