23948sdkhjf

Fakta om udbudet

EU-nr
2019/S 100-243063
Offentliggjort
24.05.2019
Udbudstype
Udbud med forhandling uden forudgående offentliggørelse

Udbyder

Kungliga Tekniska högskolan

Vindere

Inverted Lattice Light Sheet Microscope

(24.05.2019)
Carl Zeiss AB, Division of Microscopy
PO Box 27324
102 54 Stockholm

Opdateringer

Rettelse
(31.05.2019)

II.1.4)
Placing the text to be modified:Short description:
instead of:
For our research on subcellular signalling, organelle dynamics and intercellular communication we need to purchase an inverted lattice light sheet microscope that is capable to do fast and long term 4D fluorescence imaging of living cells.
Read:
For our research on subcellular signalling, organelle dynamics and intercellular communication we need to purchase a light sheet microscope that is capable to do fast and long term 4D fluorescence imaging of living cells.

II.2.4)
Placing the text to be modified:Description of the procurement:
instead of:
The inverted lattice light sheet microscope must operate with low light level illumination for minimal phototoxicity, have a lateral resolution of at least 300 nm, a field of view of at least 300 μm, have a volume (300 x 50 x 20 μmjavax.xml.bind.JAXBElement@7a61df2f) scan speed of at least 2,5 volumes/second and be compatible with standard sample carriers (e.g. 35 mm glass-bottom petri dishes).
Read:
The light sheet microscope must operate with low light level illumination for minimal phototoxicity.

IV.1.1)
Placing the text to be modified:Type of procedure
instead of:
Read:
Unstated

IV.1.1)
Placing the text to be modified:Type of procedure
instead of:
The inverted lattice light sheet microscope is a novel system protected by exclusive rights. It has unique functions (see below). Carls Zeiss is the sole producer of the equipment and Carl Zeiss AB the only distributor for sales to Sweden.
The inverted lattice light sheet microscope have the following functions and minimal specifications:
— complete inverted lattice light sheet microscope system optimized for live cell imaging,
— sample and optics need to be physically separated (coverslip) to avoid sample/optics contamination,
— samples prepared on standard coverslips #1,5,
— system compatible with standard sample carriers slides/coverslips, glass-bottom culture dishes (e.g. 35 mm), chamber slides, multiwell plates (6, 12, 24, …, 96, 384, 1096 wells),
— sample positioning and alignment fully motorized,
— motorized dispenser of immersion media for long time lapse recordings,
— environment control (C02, humidity and temperature) of sample chamber. Ports for perfusion in sample chamber,
— volume speed at least 2,5 Vol/s @ 300 μm x 50 μm x 20 μm,
— single plane speed at least 400 fps @ 300 μm x 20 μm,
— equipped with lasers for 488, 561, and 640 nm illumination and fast sequential multi-color imaging,
— fast switching of illumination beams (colors) within μ-seconds.,
— selection of specific light sheets via software (no direct physical interaction with hardware for alignment),
— optical system adjustment fully motorized and SW supported, no direct user interaction with hardware for adjustment required,
— control and recording computer system that can sustain a data rate permitting full speed recording for 1 h and time lapse imaging of 2 volumes/second for up to 24 hrs.
Read:
The light sheet microscope is a novel system protected by exclusive rights. It has unique functions. Carls Zeiss is the sole producer of the equipment and Carl Zeiss AB the only distributor for sales to Sweden.


Additional information
Visma notice: https://opic.com/id/afikwqpady

Inverted Lattice Light Sheet Microscope


Kungliga Tekniska högskolan

Voluntary ex ante transparency notice

Services

Legal Basis:

Directive 2014/24/EU

Section I: Contracting authority/entity

I.1) Name and addresses
Kungliga Tekniska högskolan
202100-3054
Brinellvägen 8
Stockholm
100 44
Sweden
Contact person: Karin Edoff
E-mail: kedoff@kth.se
NUTS code: SE11

Internet address(es):

Main address: http://www.kth.se

I.4) Type of the contracting authority
National or federal agency/office
I.5) Main activity
Education

Section II: Object

II.1) Scope of the procurement
II.1.1) Title:

Inverted Lattice Light Sheet Microscope

Reference number: V-2019-0516
II.1.2) Main CPV code
38000000
II.1.3) Type of contract
Services
II.1.4) Short description:

For our research on subcellular signalling, organelle dynamics and intercellular communication we need to purchase an inverted lattice light sheet microscope that is capable to do fast and long term 4D fluorescence imaging of living cells.

II.1.6) Information about lots
This contract is divided into lots: no
II.1.7) Total value of the procurement (excluding VAT)
Value excluding VAT: 8 032 500.00 SEK
II.2) Description
II.2.1) Title:
II.2.2) Additional CPV code(s)
II.2.3) Place of performance
NUTS code: SE110
II.2.4) Description of the procurement:

The inverted lattice light sheet microscope must operate with low light level illumination for minimal phototoxicity, have a lateral resolution of at least 300 nm, a field of view of at least 300 μm, have a volume (300 x 50 x 20 μm3) scan speed of at least 2,5 volumes/second and be compatible with standard sample carriers (e.g. 35 mm glass-bottom petri dishes).

II.2.5) Award criteria
II.2.11) Information about options
Options: no
II.2.13) Information about European Union funds
The procurement is related to a project and/or programme financed by European Union funds: no
II.2.14) Additional information

Section IV: Procedure

IV.1) Description
IV.1.1) Type of procedure
Negotiated procedure without prior publication
  • The works, supplies or services can be provided only by a particular economic operator for the following reason:
    • protection of exclusive rights, including intellectual property rights
Explanation:

The inverted lattice light sheet microscope is a novel system protected by exclusive rights. It has unique functions (see below). Carls Zeiss is the sole producer of the equipment and Carl Zeiss AB the only distributor for sales to Sweden.

The inverted lattice light sheet microscope have the following functions and minimal specifications:

— complete Inverted Lattice Light sheet microscope system optimized for live cell imaging,

— sample and optics need to be physically separated (coverslip) to avoid sample/optics contamination,

— samples prepared on standard coverslips #1.5,

— system compatible with standard sample carriers slides/coverslips, glass-bottom culture dishes (e.g. 35 mm), chamber slides, multiwell plates (6, 12, 24, …, 96, 384, 1096 wells),

— sample positioning and alignment fully motorized,

— motorized dispenser of immersion media for long time lapse recordings,

— environment control (C02, humidity and temperature) of sample chamber. Ports for perfusion in sample chamber,

— volume speed at least 2,5 Vol/s @ 300 μm x 50 μm x 20 μm,

— single plane speed at least 400 fps @ 300 μm x 20 μm,

— equipped with lasers for 488, 561, and 640 nm illumination and fast sequential multi-color imaging,

— fast switching of illumination beams (colors) within μ-seconds,

— selection of specific light sheets via software (no direct physical interaction with hardware for alignment),

— optical system adjustment fully motorized and SW supported, no direct user interaction with hardware for adjustment required,

— control and recording computer system that can sustain a data rate permitting full speed recording for 1 h and time lapse imaging of 2 volumes/second for up to 24 hrs.

IV.1.3) Information about framework agreement
IV.1.8) Information about the Government Procurement Agreement (GPA)
The procurement is covered by the Government Procurement Agreement: yes
IV.2) Administrative information
IV.2.1) Previous publication concerning this procedure

Section V: Award of contract/concession

Contract No: 1
Lot No: 1
Title:

Inverted Lattice Light Sheet Microscope

V.2) Award of contract/concession
V.2.1) Date of contract award decision:
21/05/2019
V.2.2) Information about tenders
The contract has been awarded to a group of economic operators: no
V.2.3) Name and address of the contractor/concessionaire
Carl Zeiss AB, Division of Microscopy
556035-3608
PO Box 27324
Stockholm
102 54
Sweden
Telephone: +46 84592500
E-mail: info.se@zeiss.com
NUTS code: SE110
The contractor/concessionaire will be an SME: yes
V.2.4) Information on value of the contract/lot/concession (excluding VAT)
Total value of the contract/lot/concession: 8 032 500.00 SEK
V.2.5) Information about subcontracting

Section VI: Complementary information

VI.3) Additional information:
VI.4) Procedures for review
VI.4.1) Review body
Förvaltningsrätten i Stockholm
Stockholm
Sweden
E-mail: forvaltningsrattenistockholm@dom.se
VI.4.2) Body responsible for mediation procedures
VI.4.3) Review procedure
VI.4.4) Service from which information about the review procedure may be obtained
VI.5) Date of dispatch of this notice:
23/05/2019

Send til en kollega

0.107