The new Soleriq series, the first chip-on-board LED from OSRAM Opto Semiconductors, achieves a luminous flux of 1500 lm to 4500 lm even at high application temperatures. This makes them ideal for downlights with high performance requirements. The Soleriq E is now available at Rutronik in two versions.

Downlights provide high-quality background lighting, e.g. in shopping malls, offices, industrial buildings and high-end residential premises. With a luminous flux of 1500 lm to 4500 lm, only one LED of the new Soleriq series is needed to give such a luminaire enough light. This makes designing luminaires much easier because only one component has to be integrated instead of lots of LEDs. The individual chips of a Soleriq E are all under the conversion layer (chip-on-board), giving the impression of a homogeneous light emitting surface. This ensures a uniform color and light appearance in the luminaire and even coupling into external light-guiding optics is very simple. The light generated can be used with much lower optical losses, which in turn makes the LED lamps and luminaires more efficient.

The Soleriq E is available in two versions, covering the entire color spectrum from 2700 to 6500 K. Even at a temperature of 85°C, which corresponds closely to the temperature in the application, the two LEDs offer an impressive efficiency of 103 lm/W at 4000 K. At this temperature the larger Soleriq E 45 achieves a typical brightness of 4000 lm (rated current 880 mA); the smaller Soleriq E 30 produces a lumen output of 2700 lm (at 600 mA).

Good color homogeneity is achieved by the narrow white grouping of the Soleriq E, corresponding to a range of 4-step MacAdam ellipses. For solutions that need a particularly high level of color homogeneity, grouping based on 2-step MacAdam ellipses is also available.

All product information stated in the current press release is based on the franchise situation in Germany. Country specific variations may therefore be possible.

About Rutronik (www.rutronik.com)