23948sdkhjf

Fakta om udbudet

Offentliggjort
21.05.2024
Udbudstype
Andre

Udbyder

Danmarks Tekniske Universitet - DTU

9033 - Purchase of High resolution DLP 3D printing system


Danmarks Tekniske Universitet - DTU

OpgavebeskrivelseDTU is planning to purchase a 3D printing system from BMF Precision, Inc., which fulfills the following specifications:

- 3D printer based on Digital Light Processing (DLP) technology, with UV exposure of complete resin layers in a single flash of light with a pattern defined by a Digital Micromirror Device (DMD)
- Top-down (or right side up) printing configuration
- Possibility of printing of 3D structures on carrier substrates such as glass cover slides or Si wafers mounted on the build platform
- x-y alignment of 3D printed structures to features prepatterned on carrier substrates
- X-y optical print resolution 2 µm on a build platform size of at least 50 x 50 mm2
- Minimal print layer height (z-resolution) of 5 µm or less
- Open-source system, meaning that all resins can be used and essential print parameters (exposure dose, timings, layer height, etc.) can be adjusted by the user in the software interface

Reasons for the Direct Award:
The microArch S230 printer is a unique system that allows the printing of structures with a resolution down to 2 µm.
We have been looking for such a system for several years, and this is the first time we have identified some equipment that can meet our high demands, and which is also very good in terms of print speed. We already have 2 similar systems from the same supplier (model S140 and model S240) purchased in 2020 and it is by far the best we have seen. However, the two existing systems only have a resolution down to 10 µm, i.e. The S230 is even better in terms of precision.
Annonceret21. maj 2024 11:30:00 CEST
Deadline31. maj 2024 12:00:00 CEST
UdbudstypeMindre danske udbud
OpgavetypeVarekøb
UdbudsformAndet
CPV kode38000000
MyndighedstypeAndet
Skønnet kontraktsum1 599 990,00

Dokumenter & materiale

Link til udbudsmaterialehttp://eu.eu-supply.com/ctm/Supplier/PublicPurchase/403837

Tildelings- og udvælgelseskriterier

TildelingskriterierLaveste pris
Udvælgelseskriterier

Kontaktperson

NavnPia Blume
Telefon+45 93511388
E-mailpiabl@dtu.dk

Ordregiver

NavnDanmarks Tekniske Universitet - DTU
AdresseAnker Engelunds Vej 1
2800 Kgs. Lyngby
DK
Telefon+45 45252525
E-maildtu@dk.dk
WWWhttp://www.dtu.dk

Send til en kollega

0.034